​​
TRIPODS, HI-HATS, DOLLIES, CAR MOUNTS & OTHER ACCESSORIES
​​
CAMERA SUPPORT
Meet The Team
Dana Dolly V2.0
with 10' Track & Stand Kit
Dana Dolly Portable Camera Dolly System. Including Dolly Rental Kit with 6" Mitchell mount riser, 150, 100 & 75mm bowl adapters, 2x ProAim Slider Stands, 1x Avenger Baby center-support Stand, and Dana Dolly Portable Pipe Track kit: 6x 40" sections configurable into a seamless 6.5' or 10'ft track. Track can be mounted to the stands, sit on apple boxes or sandbags, or the ground. Other extruded pipes can also be used with the universal track ends if longer runs are desired.
Meet The Team
EyeDirect MKII
"The original EyeDirect® uses a patented combination of mirror and beamsplitter to guarantee eye contact with any interview subject, regardless of age or mood. Subjects see the interviewer’s face while actually looking directly into the camera’s lens. The EyeDirect® Mark II is a patented device that offers an elegantly simple solution to a complicated problem. The Mark II was recognized at NAB by TV Technology’s Mario Award for 'demonstrating forward thinking and technical excellence.' "
Mounted on custom Arri Dovetail mount and dual 15mm rod system for quicker installation and adjustment.
Meet The Team
E-Image Heavy-Duty GH15
with GC102 Carbon Fiber Tripod
Complete Ikan E-Image GC102 100mm half ball mono-lock tripod system with GH15 heavy-duty fluid head using GP2 sliding balance plate mounting system.
GH15 Fluid Video Head:
Payload: 0–39.7 lbs
Counterbalance: 0–9
Pan & Tilt Drag: 0–5
Tilt Range: +80/-75°
Sliding Range: 5.7" inches
Tripod: 100mm half-ball
Plate: E-Image GP2
Pan Bar: 16.7–24" inches
Weight: 8.4 lbs
​
GC102 Tripod Legs:
Payload Capacity: 133 lbs
Mount: 100mm bowl
Height Range: 32.5–68.5"
Legs: 3-Section Carbon Fiber
Leg Lock: 1-Twist Mono-Lock
Spreader: Mid-Level
Feet: Rubber/Metal Spike
Weight: 9 lbs
​
Meet The Team
Sachtler Video 15 SpeedBalance
with ENG 2 CarbonFibre Tripod
Complete Sachtler ENG 2 100mm half ball 2-stage speedlock tripod system with Video 15 SB fluid head using Touch & Go® plate 16 mounting system.
Video 15 SB Fluid Head:
Payload: 2.2-35.3 lbs
Counterbalance: 0–12
Pan & Tilt Drag: 0–7
Tilt Range: +90/-75°
Sliding Range: 2.8" inches
Tripod: 100mm half-ball
Plate: Touch & Go Plate 16
Pan Bar: 13.8-20.5" inches
Weight: 6.2 lbs
​
ENG 2 CF Tripod Legs:
Payload: 88.18 lbs
Mount: 100mm bowl
Height Range: 19.7–59.5"
Legs: 3-Section Carbon Fibre
Leg Lock: Dual Stage Levers
Spreader: Mid-Level
Feet: Rubber/Metal Spike
Weight: 7.27 lbs
​
Meet The Team
Sachtler DV 12 SpeedBalance
with ENG 2 CarbonFibre Tripod
Complete Sachtler ENG 2 100mm half ball 2-stage speedlock tripod system with Video 15 SB fluid head using Touch & Go® plate 16 mounting system.
DV 12 SB Fluid Video Head:
Payload: 2.2-31 lbs
Counterbalance: 0–12
Pan & Tilt Drag: 0–5
Tilt Range: +90/-75°
Sliding Range: 2.36" inches
Tripod: 100mm half-ball
Plate: Touch & Go Plate 16
Pan Bar: 17.7"
Weight: 5.5 lbs
​
ENG 2 CF Tripod Legs:
Payload: 88.18 lbs
Mount: 100mm bowl
Height Range: 18.1–61"
Legs: 3-Section Carbon Fibre
Leg Lock: Dual Stage Levers
Spreader: Ground-Level
Feet: Ground Spreader
Weight: 7.49 lbs
​
Meet The Team
E-Image GH06F
with GA752 Aluminum Tripod
Complete Ikan E-Image GA752 75mm half ball mono-lock tripod system with GH06 fluid head using GP1 sliding balance plate mounting system.
GH06F Fluid Video Head:
Payload: 13.2 lbs
Counterbalance: 0–5
Pan & Tilt Drag: 0–3
Tilt Range: +90/-60°
Sliding Range: 2.8" inches
Tripod: 75mm half-ball
Plate: E-Image GP1
Pan Bar: 15–22.4"
Weight: 4.4 lbs
​
GA752 Tripod Legs:
Payload: 88 lbs
Mount: 75mm bowl
Height Range: 24.75–62"
Legs: 3-Section Aluminum
Leg Lock: 1-Twist Mono-Lock
Spreader: Mid-Level
Feet: Rubber/Metal Spike
Weight: 7 lbs
​
Meet The Team
Benro 100mm Hi-Hat Tripod
Standard bowl mount to accept 100mm video head. Includes low profile tie down. Multiple independent leg positions. Each leg can be independently positioned at one of the three locks located on the outside of the bowl. This allows you to easily set up the hi-hat for use on uneven terrain and even stairs. Each leg features oversized rubber twist locks and telescopes for adjusting the height.
Meet The Team
Board-Mounted 100mm Hi-Hat
Manfrotto 529B Hi-Hat mounted to standard Alan Gordon wooden Hi-Hat board, for a more stable base. 100mm video head bowl mount. The octagonal board has handle cutouts, and allows for heavy sandbag loading, while also providing the ability to strap the hi-hat down to large object or surfaces. The robust board also allows the hi-hat to be stored on the underside of camera carts that have hi-hat rails, like Yaeger & Sons or Inovativ carts.
Meet The Team
8'ft Werner Ladder-Pod
The sky-scraper of tripods. An 8'ft Werner Heavy Duty Non-Conductive Fiberglass A-Frame Step Ladder (12'ft reach) with top cap capable of mounting 100mm ball heads, for unique high-elevation shots. Using a small Mitchell to 75/100mm adapter ring and a video head with a 100mm half-ball—like the E-Image GH15—allows for leveling the head independent from the ladder. Other half-ball heads with large flat spots can be mounted level to the ladder top cap.
Meet The Team
Benro 75mm Hi-Hat Tripod
Standard bowl mount to accept 75mm video head. Includes low profile tie down. Multiple independent leg positions. Each leg can be independently positioned at one of the three locks located on the outside of the bowl. This allows you to easily set up the hi-hat for use on uneven terrain and even stairs. Each leg features oversized rubber twist locks and telescopes for adjusting the height.
ProAim Power Suction Car Mount
A car mount with 3 main suction cups and additional support, for cameras up to 44 lbs. An Arri Dovetail plate on a heavy duty ball head with Noga support arm were added to the camera mounting platform to allow for precise camera articulation and quick dovetail attach/detach. The camera mounting platform has three leg attachment points that are each fitted with two positive locking ratchet joints; one for tilt and one for swivel. Each locking ratchet joint has a quick turn knurled lock ring for easy adjustment. You can unlock and lock each joint with a slight twist. Includes hard case.
K&F 4.5" Suction Cup Mount (x2)
The 4.5" Suction Cup Camera Mount is perfect for in-car ride along filming. It can support cameras up to 6.6 lbs with the included magic arm. The suction cup can support 88 lbs when mounted on a vertical surface, or 132 lbs on a horizontal surface. A sturdy ball head can be mounted to the cup to support cameras beyond the weight capacity of the small magic arm (over 6.6 lbs). The cup suctions to flat glossy surfaces like glass, metal, or non-porous stone. The top plate is equipped with multiple Arri locating 1/4“ and 3/8” screw interfaces. Comes with standard action cam mount compatible with GoPro, DJI, Insta360, etc.
Meet The Team
Accsoon TopRig S60
Motorized 24" Video Slider Kit
24" motorized video slider for small hybrid cine cameras. Set speed and start/stop points, along with mechanical auto-pan adjustment. Payload capacity of 5.5 lbs vertically or 8.8 lbs horizontally. AC/DC or NP-F battery power. 0.1-5cm travel per second. Includes 75mm bowl tripod legs with 3/8-16 flat bowl adapter, as well as 2 tripod clamp-on support arms to reduce sag, and heavy-duty ball head for rock solid camera articulation. Specially useful for adding interview parallax, macro dolly sweeps, and time-lapse moves (10-minutes at slowest travel speed).
TYPICAL DAY RATES ARE APPROXIMATELY 5% OF MSRP VALUE.​​
CONTACT ME TO DISCUSS PRODUCTION NEEDS & BUNDLE DISCOUNTS.